Publicacións en colaboración con investigadores/as de Universidad Complutense de Madrid (21)

2023

  1. 6th International Congress on Water, Waste and Energy Management (WWEM-22). 5th International Conference on Green Chemistry and Sustainable Engineering (GreenChem-22). 2022 International Conference on Green Energy and Environmental Technology (GEET-22)

    Environmental Science and Pollution Research

  2. UAS IR-Thermograms Processing and Photogrammetry of Thermal Images for the Inspection of Building Envelopes

    Applied Sciences (Switzerland), Vol. 13, Núm. 6

2021

  1. Treatment technologies for emerging contaminants in water

    Journal of Environmental Management

2018

  1. Analysis of the September ∈-Perseid outburst in 2013

    Monthly Notices of the Royal Astronomical Society, Vol. 480, Núm. 2, pp. 2501-2507

2015

  1. Failure modes in halved and tabled tenoned timber scarf joint by tension test

    Construction and Building Materials, Vol. 96, pp. 360-367

2013

  1. Determination of the influence of size and position of knots on load capacity and stress distribution in timber beams of Pinus sylvestris using finite element model

    Biosystems Engineering, Vol. 114, Núm. 3, pp. 214-222

  2. Proposal for visual grading criteria of structural timber of sweet chestnut from Spain

    European Journal of Wood and Wood Products, Vol. 71, Núm. 4, pp. 529-532

2012

  1. Analysis of the stress state of a halved and tabled traditional timber scarf joint with the finite element method

    World Conference on Timber Engineering 2012, WCTE 2012

2011

  1. Prediction of bending load capacity of timber beams using a finite element method simulation of knots and grain deviation

    Biosystems Engineering, Vol. 109, Núm. 4, pp. 241-249

2010

  1. F.E.M. analysis of the strength loss in timber due to the presence of knots

    11th World Conference on Timber Engineering 2010, WCTE 2010

2007

  1. Analysis of the Stress State at the Cogging Joint in Timber Structures

    Biosystems Engineering, Vol. 96, Núm. 1, pp. 79-90

2005

  1. Analysis of dynamic discharge pressures in cylindrical slender silos with a flat bottom or with a hopper: Comparison with eurocode 1

    Biosystems Engineering, Vol. 91, Núm. 3, pp. 335-348

2003

  1. Comparative analysis of corrective action of various liming and gypsum amendments on a palexerul

    Communications in Soil Science and Plant Analysis, Vol. 34, Núm. 5-6, pp. 709-723

2002

  1. Recursive classifiers

    IEEE International Symposium on Information Theory - Proceedings, pp. 185

  2. Study of ammonium contamination in leachates from an ultisol following application of various types of amendment

    Water, Air, and Soil Pollution, Vol. 133, Núm. 1-4, pp. 133-143

  3. Synaptonemal complex analysis in oocytes and spermatocytes of threespine stickleback Gasterosteus aculeatus (Teleostei, Gasterosteidae)

    Genetica, Vol. 114, Núm. 1, pp. 53-56

2001

  1. Discharge and the eccentricity of the hopper influence on the silo wall pressures

    Journal of Engineering Mechanics, Vol. 127, Núm. 10, pp. 1067-1074

  2. Static and dynamic silo loads using finite element models

    Journal of Agricultural and Engineering Research, Vol. 78, Núm. 3, pp. 299-308

1999

  1. Mineralogical analysis as a means for distinguishing levels in a red soil chronosequence

    Communications in Soil Science and Plant Analysis, Vol. 30, Núm. 13-14, pp. 1885-1896

1997

  1. Biogeographical zonation of the western Iberian peninsula on the basis of the distribution of earthworm species

    Journal of Biogeography, Vol. 24, Núm. 6, pp. 893-901