Departamento de Enxeñaría Química
Departamento
Tomás Francisco
Allegue Martínez
Publicacións nas que colabora con Tomás Francisco Allegue Martínez (10)
2024
-
Maximizing sustainability by energy recovery in anaerobic treatment systems
Anaerobic Treatment of Domestic Wastewater: present status and potentialities (IWA Publishing), pp. 167-205
-
Post-treatment of anaerobically digested sewage for nutrient removal
Anaerobic Treatment of Domestic Wastewater: present status and potentialities (IWA Publishing), pp. 127-166
2023
-
Impact of dissolved sulfide on a hybrid membrane bioreactor treating the effluent of a mainstream up-flow anaerobic sludge blanket
Environmental Science: Water Research and Technology, Vol. 9, Núm. 10, pp. 2733-2744
2022
-
Operating strategies to optimize a membrane bioreactor enriched in nitrite-dependent anaerobic methane-oxidizing bacteria
Chemical Engineering Journal, Vol. 450
2020
-
Simultaneous nitrogen and dissolved methane removal from an upflow anaerobic sludge blanket reactor effluent using an integrated fixed-film activated sludge system
Journal of Environmental Management, Vol. 263
2019
-
Development and study of simultaneous nitrogen and methane removal bioprocesses for wastewater treatment
Development and study of simultaneous nitrogen and methane removal bioprocesses for wastewater treatment
-
Minimization of dissolved methane, nitrogen and organic micropollutants emissions of effluents from a methanogenic reactor by using a preanoxic MBR post-treatment system
Science of the Total Environment, Vol. 671, pp. 165-174
2018
-
An innovative wastewater treatment technology based on UASB and IFAS for cost-efficient macro and micropollutant removal
Journal of Hazardous Materials, Vol. 359, pp. 113-120
-
Enrichment of nitrite-dependent anaerobic methane oxidizing bacteria in a membrane bioreactor
Chemical Engineering Journal, Vol. 347, pp. 721-730
-
Integrating granular activated carbon in the post-treatment of membrane and settler effluents to improve organic micropollutants removal
Chemical Engineering Journal, Vol. 345, pp. 79-86