Publikationen in Zusammenarbeit mit Forschern von Universidad de Extremadura (15)

2019

  1. Cost optimisation of glued laminated timber roof structures using genetic algorithms

    Biosystems Engineering, Vol. 187, pp. 258-277

2018

  1. Determinación de las propiedades mecánicas del castaño extremeño mediante medición de la velocidad de propagación de onda de ultrasonidos

    IX Congresso Ibérico de Agroengenharia: Livro de Atas

  2. Experimental and numerical studies of the stress state at the reverse step joint in heavy timber trusses

    Materials and Structures/Materiaux et Constructions, Vol. 51, Núm. 1

2016

  1. Analisis experimental y por elementos finitos del estado tensional de uniones tradicionales por embarbillado simple y doble en madera estructural

    VIII Congreso Ibérico de agroingeniería: Retos de la nueva agricultura mediterránea. Libro de actas

  2. Experimental and finite element analysis of the stress state at single and double step front notched traditional joint in timber structures

    VIII CONGRESO IBERICO DE AGROINGENIERIA LIBRO DE ACTAS: RETOS DE LA NUEVA AGRICULTURA MEDITERRANEA

  3. Genetic algorithm optimisation of heavy timber trusses with dowel joints according to Eurocode 5

    Biosystems Engineering, Vol. 144, pp. 115-132

2008

  1. Finite element analysis under different boundary conditions of the filling of cylindrical steel silos having an eccentric hopper

    Journal of Constructional Steel Research, Vol. 64, Núm. 4, pp. 480-492

2007

  1. Analysis of the Stress State at the Cogging Joint in Timber Structures

    Biosystems Engineering, Vol. 96, Núm. 1, pp. 79-90

2006

  1. Influence of hopper eccentricity on discharge of cylindrical mass flow silos with rigid walls

    Journal of Engineering Mechanics, Vol. 132, Núm. 9, pp. 1026-1033

  2. Mechanical properties of granular agricultural materials, part 2

    Transactions of the ASABE, Vol. 49, Núm. 2, pp. 479-489

  3. Simulation of the filling pressures of cylindrical steel silos with concentric and eccentric hoppers using 3-dimensional finite element models

    Transactions of the ASABE, Vol. 49, Núm. 6, pp. 1881-1895

2005

  1. Analysis of dynamic discharge pressures in cylindrical slender silos with a flat bottom or with a hopper: Comparison with eurocode 1

    Biosystems Engineering, Vol. 91, Núm. 3, pp. 335-348

  2. Discharge from cylindrical slender steel silos: Finite element simulation and comparison with eurocode

    Transactions of the American Society of Agricultural Engineers, Vol. 48, Núm. 6, pp. 2315-2321

2004

  1. Parametric study of the pressures of cylindrical silos with rigid wall

    ASAE Annual International Meeting 2004

  2. Simulation of discharging processes in metallic silos

    ASAE Annual International Meeting 2004